# 3dPrinting

## Snapmaker A350T
- 320x350x330
- x: -19 to 301; halfStep: 160
  y: 347 to -3; halfStep: 175
  z; 334 to 4; halfStep: 165
- Ideal workOrigin: 141, 172, 44
- Total x length:346:0-345: center: 173
- Total y length:358:0-357: center: 178
### Luban
- get current settings: M503
  G21 ; (mm)

  M92 X160.00 Y160.00 Z400.00 B888.89Current E212.21, BACKUP SINGLE E212.21BACKUP DUAL E667.22
  M203 X100.00 Y100.00 Z40.00 E40.00
  M201 X1000.00 Y1000.00 Z100.00 E10000.00
  M204 P1000.00 R1000.00 T1000.00
  M205 B20000.00 S0.00 T0.00 P0.05 L3.00 C0.05 J0.02
  M206 X-19.00 Y-10.00 Z0.00
  M218 T1 X26.00 Y0.00 Z-1.500
  left_z_compensation: 1.00  right_z_compensation: 1.00
  M420 S0 Z0.00
  G29 W I0 J0 Z9.00000
  G29 W I1 J0 Z9.00000
  G29 W I2 J0 Z9.00000
  G29 W I0 J1 Z9.00000
  G29 W I1 J1 Z9.00000
  G29 W I2 J1 Z9.00000
  G29 W I0 J2 Z9.00000
  G29 W I1 J2 Z9.00000
  G29 W I2 J2 Z9.00000
  M301 E0 P13.00 I0.10 D17.00
  M301 E1 P13.00 I0.10 D17.00
  M851 Z0.00
  M900 T0 K0.04
  M900 T1 K0.04
  Z1.00
  ok

- get current position: M114:
   X:-191.50 Y:179.50 Z:309.50 E:0.00 Count X:0 Y:57120 Z:133600 B:0
   X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:30640 Y:28400 Z:9800 B:0
- after homing
   
- inspect the model for missing slices after generating gcode
- if slices missing then repair the model and regenerate gcode
- goto home: G54 or G28

- set current work coordinates to center: G92 X-173 Y178 Z165

- goto work: G0 X0 Y0 B0 Z0 F1500


## multicolor
- co print
- mosaic palette 3